Electromagnetic Fields (Emf) - Philips QC5099 Bedienungsanleitung

- If the adapter is damaged, always have it replaced with one of the
original type in order to avoid a hazard.
- Do not charge the appliance in a pouch or cassette.
- Do not use the appliance when one of the attachments is damaged
or broken, as this may cause injury.
- This appliance is only intended for clipping human scalp hair. Do not
use it for any other purpose.
- This appliance is suitable for mains voltages from 220 to 240 volts.
general
- The adapter transforms 100-240 volts to a safe low voltage of less
than 24 volts.

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding
electromagnetic fields (EMF). If handled properly and according to the
instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.
Charging
Charge the appliance for 12 hours before you use it for the first time.
A fully charged appliance has a cordless clipping time of up to 50 minutes.
Do not charge the appliance for more than 24 hours.
1 Make sure the appliance is switched off.
2 Insert the appliance plug into the appliance (Fig. 1).
3 Insert the adapter into the wall socket.
The charging light goes on to indicate that the battery is being
,
charged.
Note: The charging light does not go out or change colour when the appliance
is fully charged.
English
7