General Information And Safety - STG-BEIKIRCH WRZ 40M-4G Bedienungsanleitung

1.0 General information
and Safety
Documentation: This documentation is exclusively valid
for the product or product range as stated in the type de-
signation on the cover and must be applied comprehensi-
vely. This technical documentation must be read carefully
before installation. Follow the guidelines. Contact the
manufacturer if you have any questions or problems. This
documentation should be retained for future reference.
Subject to technical modifictionsDiagram is not binding.
User: This documentation is aimed at trained, professional
electricians with safety awareness, who are familiar with
mechanical and electrical equipment installation, accident
prevention regulations and industrial compensation laws,
and contains important information for operators and
users.
Please observe the following safety instructions which are
emphasized by special symbols.
Caution: Danger to persons due to electricity.
Attention: Danger to persons due to risks arising
from the operation of the equipment.
Danger of crushing/trapping.
Warning: Non-observance leads to destruction.
Danger to material due to incorrect handling.
Important information
Use according to regulations: The product may
only be used for the functions and applications
detailed, and in accordance with the accompanying
documentation. Unauthorised electrical and mechanical
modifications are not permitted and will invalidate warran-
ty and liability.
Transport and storage: The product may only be trans-
ported and stored in its original packaging. It must not be
knocked, dropped, or exposed to moisture, aggressive
vapours or harmful environments. More detailed transport
and storage instructions provided by the manufacturer
must be observed.
Installation: Installation and assembly may only be carried
out by trained professional electricians, in accordance
with the recognised rules of engineering as well as the
technical documentation provided here. This will guaran-
tee that the product will function safely during operation.
Care should be taken that all mechanical components
are fixed. Immediately after installation the electrical and
mechanical components should be checked to ensure
that they function correctly, and the tests and the results
thereof should be documented.
01/13424999503
Wind-/Rain-control unit WRZ 40M-4G
Operation: Safe operation is guaranteed if the accepta-
ble rated values and guidelines regarding maintenance
information stated in this documentation, as well as
supplementary information provided by the manufacturer,
are followed.
Malfunction: If a malfunction is identified in the course of
installation, maintenance, inspection etc., immediate
action should be taken to rectify the problem.
Repair and maintenance: Defective equipment must
only be repaired by the manufacturer, or by companies
authorised by the manufacturer. Only original spare parts
may be used. Repairs may only be carried out by trained
professional electricians, in accordance with the recognis-
ed rules of engineering as well as the technical documen-
tation provided here and supplementary advice from the
manufacturer. This will guarantee that the product will
function safely during operation. Care should be taken
that all mechanical components are fixed.
Immediately after repair the electrical and mechanical
components should be checked to ensure that they
function correctly, and the tests and the results thereof
should be documented.
Maintenance: If the product is used as part of a safety
system such as a smoke and heat extraction system
(SHE), it must be tested, maintained and if necessary
repaired at least once a year as specified by the manu-
facturer or in line with DIN EN 18232-2 Smoke and heat
control systems for instance. This is also recommended
for systems used purely for ventilation. If the product is
to be used in other safety systems, shorter maintenance
intervals may be necessary. With systems composed of
control units, opening devices, control-sections etc., all
components that interact directly with each other are to be
included in maintenance.
Maintenance must be carried out comprehensively
following the manufacturer guidelines and the accompa-
nying documentation. Components requiring maintenance
must be accessible. Defective equipment must only be
repaired by the manufacturer, or by companies autho-
rised by the manufacturer. Only original spare parts may
be used. All components that have a specified maximum
operation time (such as batteries) must be replaced within
this time (see technical specification) with original parts or
manufacturer-approved parts. Regular inspection is ne-
cessary to ensure that the equipment is ready for operati-
on. A maintenance contract with a recognised contractor
is recommended.
23