Fenix MR 300 Bedienungsanleitung Seite 7

Instructions for installation and use
Installation Instructions
Installation, electrical connection and the first use should only be
performed by a qualified person.
Distances
The distance from the lower edge of the appliance to the floor
should not be less than 50 mm. There should also be a distance
of at least 100 mm at the sides, e.g. to a furniture, and above
(see Fig. 2).
In bathrooms, the panel must be installed in accordance with
Figure 1 in zones 2 and 3.
The panel is a class II equipment and is splash water protected
with the IP 44 protection. The panel should not be arranged right
under a fixed connection socket. The electric installation must be
equipped with a double pole switching device with a control gap
opening of at least 3 mm (this requirement is met by the Fenix
Therm 100 thermostat.
7