TCS TASTA IVW5110-0145 Bedienungsanleitung Seite 2

LED INDICATION
Green LED is ON
incoming door call or internal call > active voice
connection
Green LED blinks 3 times
busy speech channel, door release is still possible
Red LED is ON
The ring tone mute is activated, incoming door or internal
calls are not signalled acoustically
Blue LED is ON
door is open
Green, red and blue LED, all are ON
ring tone selection is activated
INSTRUCTION MANUAL
Green, red and blue LED, all are flashing
Series TASTA error indication > An error tone sounds once. The
Video indoor station for hands-free talking device is not ready for operation. For trouble shooting
IVW5110-0145 contact your qualified electrician.
IVW5111-0145
Ambient illumination is ON
German / English can be de-/activated manually (factory setting > ON)
Ambient illumination blinks
indication of an incoming door or internal call, can be
deactivated by a qualified electrician
DEVICE OVERVIEW
Contrast
Brightness
Red LED
Smart Slot
Call OFF button
Volume button
Speech button
Blue LED
Green LED
OPERATING ELEMENTE
Smart Slot
Interface for additional functional extensions (e.g.
radio gong). Contact your qualified electrician.
Call OFF button
> activate ring tone mute
> press for 8 seconds: initiate/terminate the ring
tone selection
Volume button
> ring tone can be adjusted in 4 steps
> volume voice output can be adjusted in 4 steps
Speech button
> accept/terminate a call
> press for 2 seconds to de-/activate the half-duplex
communication
> ring tone selection for door call 2
Function button*
> Select from the following functions which you can
trigger via the function button:
• trigger control function (e.g. door release)
• activate automatic door release
• call diversion to a second indoor station
• internal call, calling a second indoor station
> ring tone selection for internal call
Light switch button
Colour saturation
> e.g. to switch in the corridor light
> press for 4 seconds to de-/activate the ambient
illumination
> the following functions can be triggered alternatively
via the light switch button:
• trigger control function (e.g. open the driveway gate)
• calling a second indoor station
> ring tone selection for floor call
Image button
Door release button
> open the door
> ring tone selection for door call 1
Function button
Brightness
> the brightness can be adjusted in 8 steps
Contrast
> the contrast can be adjusted in 8 steps
Light switch
button
Colour saturation
Door release
> the colour saturation can be adjusted in 8 steps
button
Image button
> activate the video image of the front door station
> switch-over between different video sources
Ambient illumination
* This alternative settings can be adjusted by your qua-
lified electrician.
OPERATION
Accept door call and internal call Ring tone volume
An incoming call is signalled through a ring tone and The ring tone volume can be adjusted in 4 steps.
the blinking green LED. Shortly press the speech Setting the ring tone volume is only possible, when
button to accept the call. Third parties cannot listen no voice connection is established. Repeatedly press
in to conversations. Shortly press the speech button the volume button. The ring tone sounds in the ad-
again to terminate the conversation. Alternatively press justed volume.
the door release button to trigger the door release,
the conversation is terminated after 4 seconds. The Ring tone selection
call is terminated automatically after 2 minutes. If Different ring tones can be adjusted for floor calls,
background noises affect the conversation, press the internal calls and calls from a front door station.
speech button for at least 2 seconds after you have
accepted the call to activate the function half-duplex Activate the ring tone selection:
communication. Keep the speech button pressed to Keep the call OFF button pressed for 8 seconds,
speak and release the speech button to hear your when no voice connection is established. An ack-
conversation partner. nowledgement tone sounds and all LEDs are ON.
The ring tone seletion is activated...
Door release
Shortly press the door release button to open the Ring tone for floor call
door. The blue LED lights up. The conversation is ...Repeatedly press the light switch button to select
terminated automatically after 4 seconds. the ring tones. The ring tone selected last is stored.
Ring tone mute
Ring tone for internal call
Shortly press the call OFF button. The ring tone is ...Repeatedly press the function button until the
deactivated and the red LED is ON. In case of an in- required ring tone sounds. The ring tone selected
coming call no acoustic signal sounds. Press the call last is stored.
OFF button again. The ring tone mute is deactivated
and the red LED is OFF. Ring tone for door call 1 from front door station
...Repeatedly press the door release button to select
Switch on the light the ring tone. The ring tone selected last is stored.
In case of an incoming door call or an already esta-
blished voice connection you can switch on the light Ring tone for door call 2 from front door station
(e.g. staircase light). Shortly press the light switch ...Repeatedly press the speech button to select the
button. The light is switched on. ring tone. The ring tone selected last is stored.
Trigger additional functions via the function button Terminate the ring tone selection
Press the function button to trigger an additional Shortly press once the call OFF button. An ack-
switching function via control function. nowledgement tone sounds and the LEDs are OFF.
The ring tone selection is deactivated. If no button
Image activation is pressed for 8 seconds the devices terminates the
Shortly press the image button to display the image ring tone selection automatically.
of the front door station. Press the image button
CONFIGURABLE SETTINGS
again to switch-over between different video sources.
EXTERNAL IMAGE STORAGE*
Ambient illumination
Keep the light switch button pressed for 4 seconds.
Images (or image sequences) can be stored with the The ambient illumination is activated and lights
external image storage FVM1000. The number of up blue. Press the light switch button again for 4
images per FVM1000 is limited to 512. If the maximum seconds. The ambient illumination is deactivated, if
is reached, the oldest image will be overwritten. this function has not been blocked by your qualified
electrician.
View stored images
Receive an internal call
Press the image button to directly display the image.
Press the function button to browse through all new The internal call sounds and the green LED lights
stored images. up. Shortlxy press the speech button to accept the
internal call.
Delete stored images
Press the image button. The image is deleted. The Control function for additional functions*
image stored before is displayed. If the control function has been configured, you
can trigger these by pressing the function button
USER SETTINGS
(delivery state).
Volume voice output Internal call*
The volume voice output can be adjusted in 4 steps You can call another indoor station. Shortly press
during an established voice connection. Repeatedly the function button and/or the light switch button.
press the volume button until you have adjusted the An acknowledgememt tone sounds, if the call has
required volume for the voice output. reached its call destination. If the call is accepted at
the called device, a voice connection is established.
One internal call can be configured to the function
button and one internal can be configured to the
light switch button.
* The external image storage FVM1000 is not enclosed * These settings are adjusted by your qualified electrician.
in the scope of delivery.
Parallel call*
In case of an incoming door, floor or internal call
a second indoor station sounds parallel. The ring
tone sounds at both indoor stations.
Call diversion*
An incoming call is diverted to a second indoor sta-
tion. Shortly press the function button. The red LED
blinks. The call diversion is activated. Shortly press
the function button again. The red LED expires. The
call diversion is deactivated.
Floor door release function*
If the floor push-button at the floor door is pressed,
you can open the floor door (instead of the front
door) with the door release button within the next
30 seconds.
Automatic door release*
If this function is activated, an incoming door call
directly triggers the door release. Shortly press the
function button. The red LED blinks. The door release
automatic is activated. Shortly press the function button
again. The red LED expires. The door release automatic
is deactivated.
NOTES
Warranty
We offer a simplified processing in case of warranty.
Note our conditions of sale and delivery, available under
www.tcsag. de and in our current catalogue. Please
contact your qualified electrician.
Service
The warranty is granted in accordance to the current
legal conditions. Removing the device in case of a
fault has to be executed by your qualified electrician.
Cleaning
Clean the device with a dry or slightly wet cloth. Remove
stronger stains with a mild household cleaner. Avoid
water from entering the device! Do not use any abrasive
detergents!
Information on disposal
Dispose the device separateley from domestic waste via
a collection point for electronic scrap. The packaging
is recyclable. Dispose the parts of the packaging in
collecting tanks for cardboard and paper.
HOTLINE
Fon +49 4194 9881-188
E-Mail hotline@tcsag.de
TCS TürControlSysteme AG
Geschwister-Scholl-Straße 7
D-39307 Genthin
GERMANY
TCS Österreich GmbH
Gewerbepark 21
A-2821 Lanzenkirchen
Printout: 05/2017 | Subject to technical changes.
BA_IVW5110-0145 1 A
www.tcsag.de