Before Started; Safety Precautions; Network Requirements - Noxon Fun Anleitung

• 1. Before Started
• 1.1 Network Requirement
• Before using NOXON FUN, the following requirements are needed:
• A broadband connection (DSL 1Mbit/s or higher) in combination with a wireless access
point, or router, or similar network devices where DHCP is available.
• WEP or WPA code (as a password) if the wireless network is configured to use WEP,
WPA data encryption. Wireless access point or router with WPS function is also sup-
ported.
• A PC or smart phone with a network ready. This network has to be the same one as
NOXON FUN equipped with.

1.2 Safety Precautions

• Do not drop NOXON FUN and do not expose it to liquid, moisture or humidity. These
might lead to damage to the device.
• If NOXON FUN is moved from a cold environment into a warmer one, do let it adapt to
the new temperature before operate the device. Otherwise, it might lead to condensa-
tion and cause malfunctions in the device.
• Do not use NOXON FUN in the dust environment as dust can damage the interior
electronic components and lead to malfunctions in the device.
• Protect NOXON FUN from strong vibrations and place it on stable surfaces.
• Do not attempt to disassembly NOXON FUN.
• Only use the power adaptor delivered with NOXON FUN.
• Never touch the power plug with wet hands and never pull on the power cable when
pulling the plug out of the power socket.
• Make sure the electrical voltage specified on NOXON FUN and its power plug is cor-
responding to the voltage of the power socket. Incorrect voltage will destroy the device.
• If NOXON FUN is not using for a long period of time, disconnect it from the power sup-
ply by unplugging the power plug. This is to avoid the risk of fire.
• It is not recommended to listening NOXON FUN with headphone via LINE OUT. In
case you use headphone, always reduce the volume before put on the headphones.
After the headphones are positioned properly, increase the volume to the desired level.
• Always power off NOXON FUN when cleaning it.
• Never use any harsh or strong solvents to clean NOXON FUN since these may dam-
age the surface of the device. Dry, soft cloth is appropriate, however, if NOXON FUN
is extremely dirty, it may be wiped off with a slightly moist cloth. Make sure the device
is dried off after cleaning.
• When you are necessary to ship NOXON FUN, store it in its original package. Save
the package for this purpose.
• If you have to dispose the device in the future, note that it should not be disposed with
household waste. Bring it to a reception point for the recycling of electrical devices.
Consult your local authority or retailer for recycling advice.
33