Getting Started; Connection And Preparation - Noxon A120 Bedienungsanleitung

6

Getting Started

6.1 Connection and Preparation

Connect DAB+/FM antenna for DAB+ and FM reception.
Connect the RCA audio cable to the Line out jacks of A120+ and your
own speaker.
Then connect the power adaptor to the back of A120+ and plug it into
the power socket. (Turn on your own speaker if an audio out is
needed.)
Connecting to the network
●
For wired Ethernet (For A120+ model only)
Use an Ethernet cable (RJ45 jack) to connect the LAN ports on
A120+ and your network device. Check if the light indicators on
the network device are in appropriate status.
●
For wireless WiFi
Make sure you have set up the wireless network and you have the
WEP, WPA, or WPA2 security password to activate the connection.
You may also use the WPS (WiFi Protected Setup) function for
easy pairing between the network device and A120+. Check if the
light indicators on the network device are in appropriate status.
Connecting the headphones
Turn the volume down before using the headphones.
Insert the headphone plug (standard 3.5mm) into the headphone
socket at the front of the device.
EN 9