Noxon Fun Anleitung Seite 46

NOXON FUN
Setup the date and time; set time format display as 12 Hour or 24 Hour; set date format
in the positions of YY (year), MM (month) and DD (day) – YY/MM/DD, DD/MM/YY or MM/
DD/YY.
Turn on/off the Daylight Saving Time (DST).
With a wireless network connected, GMT (+00:00) time is a time reference of time set-
ting. Add or deduce the hour according to your time zone when you set the time.
5.3.4 Alarm
There are three independent alarms - 2 alarms of absolute time setting (Alarm 1 and
Alarm 2) and 1 alarm for relative time setting (Alarm NAP). Press Alarm on the remote
control to enter this menu directly.
The first two alarms are similar to the normal alarm, turn on then set the time and set it
alarms every day, once or every specific day of week. Choose Sound to set the sound to
Beep, Melody or Radio.
Note that the alarm source is from the last listened or preset Internet radio if Alarm Sound
is set to be Radio. It can only set one station for both alarms. When it reaches the alarm
time, the unit connects to the Internet if the set network is available. Therefore there may
be some delay from the alarm to the radio play. If no network is connection in one minute,
the alarm will change to Melody automatically.
After Alarm NAP is set, it alarms once in 5/10/20/30/60/90/120 minutes depending on
which one you have set.
You may choose Alarm Volume to configure the volume of the alarms.
When the alarm(s) is/are set, there will be a clock icon at the top of the display. The clock
icon with alarm time will also clearly display on the standby mode screen.
During alarm, press and hold Standby and press Standby/Alarm on the remote control
to stop the alarm.
Press the rest keys to snooze, after 5 minutes resume to alarm.
46