Installation - Bellcome advanced 1 Familie Benutzerhandbuch

3.2 Block diagram of the connection of additional outdoor
panels (optional)
Supply
control
unit 1
4

INSTALLATION

4.1 Recommended cables
Outdoor panel
UTP CAT5e (AWG24) cable for distances of maximum 70 m between the outdoor panel and
the supply control unit and 250m between the outdoor panel and the video terminal.
For distances greater than 250m, please request additional information from the producer.
Supply control unit
Flexible, multistrand cable, (Cu) 2 or 3 x 0,75 mm² for distances of maximum 50 m or
(Cu)2 or 3 x 1 mm² for distances of maximum 100 m.
Supply control unit
Flexible, multistrand cable, (Cu) 3 x 0,75 mm²
External video camera (optional)
UTP CAT5e (AWG24) cable for distances of maximum 200m between the external video
camera and the Supply control unit.
ATTENTION! Because the signal output of the video camera is on a coaxial cable, a balun
adapter will be used for the passage from a coaxial cable to AWG24 cable, installed between
the signal output of the video camera and the Vin2 and GNV2 inputs of the Supply control unit.
Panel 1 Panel 2
Supply
control
unit 2
Supply control unit
Electromagnetic lock (optional)
230 V a.c. network
Panel 3
Supply
control
unit 3
Video selection box
6
/
To the video terminal
Video terminal
Supply control unit
Panel 4
Supply
control
unit 4
20/96