Bellcome advanced 1 Familie Benutzerhandbuch Seite 28

At a repeated
monitoring command
8
the image disappears
(black LCD screen)
The system functions
9
(supply control unit
with accumulator)
The system functions
10
(supply control unit
with accumulator)
The system functions
(supply control unit
11
with accumulator)
USE
7
7.1 User safety instructions
Do not hit the glass screen with hard objects!
If the front glass screen cracks, DO NOT touch the product!
Control unit:
S1: green
S2: green
PROG:
Control unit:
S1: red- green
intermittent
S2: green
PROG:
Control unit:
red- green
intermittent
S2: green
PROG:
Acoustic signal
Control unit:
S1: red
S2:
PROG:
The JP1 jumper on the
supply control unit is
NOT CONNECTED, at
each stroke of the
MONITORING key, the
image on the screen of
the terminal will
change from the
image sent by the
video outdoor panel to
off screen
(there is no video
signal connected to
the Vin 2 input of the
supply control unit).
The accumulator is
in charging mode.
Defect accumulator
or discharged
Lack of tension from
the 230 V a.c.
network.
The system
functions powered
by the accumulator.
Connect the JP1 jumper.
Check that at a repeated
monitoring command,
the image on the
terminal's screen
remains unchanged.
OK
Replace the
accumulator
Check the 10A fuses
from the electrical panel
and the 1,6A Fuse 1
from the supply control
unit input.
Check the continuity of
the supply cables.
28/96