Herunterladen Diese Seite drucken

Risoluzione Dei Problemi Comuni - Aprimatic WI-MATIC ATC300E MET Montageanweisung

Werbung

Risoluzione dei problemi comuni

Problema
Motivo
Motore acceso, ma
a. Motore sovraccarico.
non funzionante.
b. Motore bloccato per installazione non
eseguita correttamente.
Arresto improvviso
a. Il motore ha incontrato un ostacolo, che
del motore durante
ne ha causato l'arresto come sistema di
il funzionamento.
protezione.
b. Spegnimento.
Common fault settlement
Faults
Faults Reason
Phenomenon
Power on, motor
a.Motor is overload.
isn't working.
b.the motor is stuck by inappropriate
installation.
Motor suddenly stop
a.Motor encounter obstacles, which will
when it's woking.
make the motor stop to protect itself.
b.Power off.
Lösungen der häufigsten Störungen
Störung
Grund
Der Motor läuft,
a. Der Motor ist überlastet.
aber funktioniert
b. Der Motor ist blockiert, da die
nicht.
Installation nicht ordnungsgemäß
ausgeführt wurde.
Plötzlicher Stillstand
a. Der Motor hat ein Hindernis entdeckt,
des Motors während
das den Stillstand als Schutzmechanismus
des Betriebs.
ausgelöst hat.
b. Abschalten.
DS43509-001C
Aprimatic s.r.l.
Via Emilia 147
40064 Ozzano dell'Emilia (BO) Italy
www.aprimatic.it - info@aprimatic.it
Tel. 051 6960711 - Fax 051 6960722
Made in P.R.C. - Made in P.R.C. -Hergestellt in P.R.C.
8
Risoluzione
a. Cambiare il motore,
scegliendone uno con una coppia
maggiore.
b. Verificare che tutti i componenti
siano stati installati correttamente.
a. Spegnere e rimuovere gli
ostacoli.
b. Accendere il motore.
Elimination Methods
a.Change motor to bigger torque.
b.Check every components
installed in the right way.
a.Power off, remove the obstacles.
b.Power on the motor.
Lösung
a. Den Motor austauschen und
einen Motor mit größerem
Drehmoment wählen.
b. Überprüfen, dass alle
Komponenten ordnungsgemäß
installiert wurden.
a. Abschalten und die Hindernisse
entfernen.
b. Motor einschalten.

Werbung

loading

Diese Anleitung auch für:

43509/015