Remarks In Respect Of The Determined Use - Klauke mini+ Bedienungsanleitung

Instruction Manual
EK 425-L
4. Remarks in respect of the
determined use
Before starting any work on electrical appliances it must be safeguarded that there are no live parts in the immediate
assembly area of the user. Is this not possible special precaution measures (e.g. acc. to EN 50110-1) for working
near live parts must be provided.
Keep your working area clean and tidy. Do not use this tool when you are tired, on drugs, had alcohol or if you are
medicated.
4.1 Operation of the unit
First you have to select the right jaws/dies for the intended application (see tab. 2).
Cycle: see pictures in front
4.2 Explanation of the application range
The tool has a large number of various jaws/dies available to crimp Klauke connecting material (Table 2). Besides the
crimping jaw CJ22 the crimping jaw CJD3 respectively CJD3BG or CJD3O or the cutting jaw CJB is also available
upon request.
Attention
Do only crimp those connecting materials mentioned in Table 2.
If different conducting materials have to be crimped, please contact the manufacturer.
Attention
Do not crimp on live cables or conductors. This tool is not considered an insulated tool.
The hand held tool is not supposed to be restrained in a vise. It is not allowed to use the tool in a stationary appli-
cation. Complying certain conditions the unit can be operated stationary with our presentation support EKST-L. The
conditions can be taken from the instruction manual of the EKST-L.
The tool is not designed for continued crimping operations. After a sequence of approximately 30-40 completed
crimps you have to make a break of 15 min. to give the tool time to cool down.
Attention
Too intensive use can cause heat damages for the tool
HE.13439_A © 09/2009 5
GB