Klauke mini+ Bedienungsanleitung Seite 24

Instruction Manual
EK 425-L
Table 3 (see pic.1)
Pos. Description
1 Crimping head
2 Retract slide
3 LED (red)
4 battery lock
5 Battery
6 LED (white)
7 Trigger
8 Locking pin
9 Dies
10 jaws
3.2 Brief description of the important
features of the unit
The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the
maximum operating pressure is reached.
A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp.
The unit is equipped with a special brake which stops the forward motion of the piston/dies when the trigger is re-
leased.
The crimping head can be smoothly turned by 330° around the longitudinal axis in order to gain better access to tight
corners and other diffi cult working areas.
A white LED illuminates the working space after activating the trigger. It automatically switches off 10 sec. after relea-
sing the trigger. This feature can be deactivated (see page VI)
HE.13439_A © 09/2009
Function
Working unit to accommodate the crimping jaws/dies
Bar to open the crimping jaws in case of an error or emergency
Indicator for Battery charge, Service Intervals and faults
Slide to unlock the battery
rechargeable Li-Ion battery 18V
to illuminate the working area
Actuator to start the crimping cycle
Pin with special lock to open/close the crimping head
interchangeable crimping dies with multiple crimping geometries
interchangeable crimping jaws for interchangeable dies
3
GB