AKO CAMRegis Installationsanleitung Seite 23

Recording mode
The unit has three operating modes:
Recording stopped (NO REC)
The unit displays the data of the active inputs but does not record them.
Recording started (REC)
The unit is currently recording the data of the active inputs.
Timed recording
The recording of data has been timed. The unit will start to record when the programmed start date and
time are reached. It is also possible to time set the stopping of recording.
To change from one mode to another, access this option again, select the appropriate option with the N or Q keys
and press the SET key.
If you are in data logging mode when you access this option, the unit will request confirmation to stop the
recording. Select the appropriate option and press SET.
Case 1: Programmed start
Non-programmed
end of recording
To scroll through values: P or O To change values: N or Q To confirm changes: SET
Digital Input Rec.
Whenever one of the digital inputs (see page 10) changes state, an event will be generated and logged in the
equipment memory.
This function displays a list of logged events. The first event will be shown in position 000, the second at 001 and
so on up to the 1000 positions available for each digital input.
When they are all taken up, any new event generated will delete the first set of 256 positions and the event will be
logged in the first position of this set.
A list of one or more events can be printed (AKO-15742, 15752 and 15782 only). To select events for printing,
scroll to the first one using the N or Q keys, press SET and select more events using the N key; the selected
events will be marked with a P, press D to start printing.
Event No.
Event date
Case 2: Programmed start and stop
Date/time of
start of recording
Type of event
Digital input activation
Digital input deactivation
Time of event
Scroll by digital inputs:
Scroll by events: N or Q
23
Date/time of
end of recording
P or O