AKO CAMRegis Installationsanleitung Seite 18

Description
Date
Time
Screen
Search arrows
Escape key
Help key
Keypad functions
Horizontal scrolling.
Changes display modes
Allows you to exit without saving changes (Programming).
ESC
Returns to the previous menu or exits programming.
NOTE: The alarms are silenced by pressing any of the above keys.
On models with printer.
On each press, the paper advances
approximately 1 cm.
Indicaciones
Alarm activated
Maximum alarm / Digital input activation (event)
EEE
Probe error (open/crossed/off-scale)
Vertical scrolling/Change value.
Changes the input to be displayed.
Alarm signal activated
B
Indicates the
recording interval
Recording
Mode
Battery
status
Full charge
Day of
Charging
the week
Defective or not
connected (blinking)
Displays the help text for the parameter or
function selected.
On standby, prints the graph of the last
calendar week logged.
From the logger menu, prints the data or
the graph shown on the screen.
From the alarm menu, prints the alarm log.
Stops any printing in progress.
Alarm signal muted/disabled
Minimum alarm / Digital input deactivation (event)
Power supply has failed and the battery is dead.
Date and time must be checked (blinking date and time)
18
Recording data
Recording data,
scheduled stop
Data logging programmed
Data logging stopped
1
Paper input lever
1
Paper feed key
Print/
fast print/
stop print key
1
Printer lid
1
Only AKO-15742/15752/15782
2
If the recording interval is 15'.
Confirms selection.
Pressing it for 5 sec. the
SET
programming menu is accessed.
2
Alarm/event delayed