Inhaltsverzeichnis
Werbung
INSTALLATION MENU
Installation menu
POWER
The installation menu contains all important basic
+
settings for starting-up your ST16.
WAIT
LEARN
• Switch off the set.
• Keep the LEARN key pressed while you switch
ENGLISH
the set on again.
– The display shows WAIT...
DEUTSCH
During this time the set copies the memory
contents to make necessary changes.
MEMORY
This procedure takes ca. 30 seconds.
LOF 9750
– After this, the display shows the actually
selected language.
LOF10000
Language selection
MEMORY
For the indication of the Programme Type (PTY)
SC 1-14
function you can select several languages
• With the 1 2 keys you can select the following
languages: ENGLISH, DEUTSCH, FRANCE,
ESPANA, PORTUGAL, NEDERLA., SVENSKA.
MEMORY
• Press MEMORY to store your selection and to
CLEAR
go to the next installation item.
– The display shows LOF 9750.
REALLY
Local Oscillator Frequency
To adapt the ST16 to older satellite dishes, you
can change the LOF that has been set in the
MEMORY
factory to 9.75 GHz.
Eventual small frequency variations will be correc-
COPY
ted by the automatic fine tuning of your ST16.
• With the 1 2 keys, the LOF can be set to
REALLY
10.0 GHz.
• Press MEMORY to store your selection and to
go to the next installation item.
– The display shows SC 1-14.
MEMORY
WAIT
SELECTING STATIONS
Station selection according to name
• Selection of the stations according to their
name can be done by remote control.
• To ensure good functioning of search by name, the
set must have been tuned to all stations at least
once, so that the names are put in the memory.
• Press FREE or DMX or FAV to select the FREE-
to-air, DMX or FAVourite station memory bank.
_
NAME
• Press first NAME and then the desired first
character of the name.
EF
F
E.g. for the 'F', press two times
/
/
.
3
EF
3
OLDIES
OLDIES
– The cursor jumps after two seconds to the right
and, if desired, you can enter the second
F_
character.
• Press STATION #.
FOLKROCK
– The display shows the first name starting with 'F_'.
STATION
• Press STATION # again to search for the other
stations starting with 'F_'
FOLKROCK
OK
• If the desired station is displayed, press OK to
tune to that station.
Note: If you wish to enter a full name, you should
leave out any special characters which are not
letters in the alphabet or numbers.
E.g. for STAR*SAT you should enter STARSAT.
TITLE
Changing the display indication
ARTIST
DMX also broadcasts information about the
playing music which can be shown on the
display of your ST16.
ALBUM
• Press the button to call up the title of the track
which is playing.
COMPOSER
– The display shows first TITLE and then the
title willl be scrolled on the display.
• Press again if you wish to know the ARTIST
CD NR
which is performing.
– ARTIST will be shown and then the name of
the artist will be scrolled on the display.
• Continue pressing if you want to call up
information on ALBUM, COMPOSER and record
label CD NR.
Frequency range of Sub-Carriers
This setting should always be SC 1–14.
(the other option 1-48 is only intended for future
developments when radio is going to completely
occupy the transponder)
• Press MEMORY to store your selection and to
go to the next installation item.
– The display shows CLEAR.?
Clear all programmes
• If you wish to completely re-install your ST16,
you can clear the whole memory.
• In case you do so, all programmes have to be
reprogrammed as described in LEARN (see
page 20)
• Press 2 if you wish to clear the memory.
– The display shows REALLY ? This security
question has been implemented to avoid
accidental erasure of all programmes.
SC 1-48
• Press 2 again to clear the memory.
– The display shows COPY ?
• If you do not wish to clear the memory, press
MEMORY to go to the next installation item
– The display shows COPY ?
Copying the factory station table
The station memory as how it was the last time
CLEAR
LEARN (see page 20) was effected can be
called back in case you have cleared your own
programming.
• Press 2 if you wish to copy the station table.
– The display shows REALLY ?
• If you do not wish to copy press MEMORY.
• If you wish to copy, press 2 to copy the stations.
– The display shows TAB COPY.
TAB COPY
• Press MEMORY again to store the settings and
leave the installation menu.
During the time WAIT.. is shown the unit is
storing the changes in the installation menu.
STORING STATIONS
Storing favourite stations
• Select the station you wish to store (in FREE or
DMX mode).
• Press MEMORY.
– The station will be stored in the lowest
available location in the favourite memory,
DMX
meaning that you need not enter a memory
location number.
– The first station which is stored is assigned to
memory location 1, the second station to
memory location 2 and so on.
• If you want to move a stored station to another
memory location, press MEMORY.
– The station is always assigned to the first
available memory location.
• If you repeatedly press MEMORY, the station
will be moved sequentially to the next empty
memory location.
• Store in the same way the other desired
stations.
Selecting stations
• To select stations from the favourite memory,
press first FAV.
• Then, choose the station as described before.
Deleting stations
• If you want to delete a station from the
favourite memory bank, first call up its number.
• Press CANCEL.
– The station is deleted, the FAV flag goes out
and the display shows the FREE or DMX
memory number of the station again.
• If you press FAV when all stations in the
favourite bank have been deleted, EMPTY is
shown on the display.
FAV
DMX
• Stations from the DMX and FREE memory bank
EMPTY
can only be deleted if the display shows
NO SIG.
RADIO STATIONS
Radio stations
There are two kind of radio stations which can be
DMX
obtained via the ASTRA satellite: The so-called FREE-
to-air and DMX stations:
NO SIG
If no reception is possible, the display shows NO SIG.
FREE-to-air stations
RAD ROPA
The FREE-to-air stations are well-known public radio
programmes, which are transmitted in digital format.
• Press FREE to select the FREE-to-air mode.
DMX stations
ADR is also broadcasting the programmes from DMX
'Digital Music eXpress' in a scrambled format. For
reception of these programmes you need a decoder
which is integrated in the ST16 and a smart-card for
which a regular fee has to be paid.
The DMX card supplied with the set enables free
listening to DMX service during 10 days, starting at the
first time you select DMX with the card inserted.
Note: The same card will be used if the necessary
MEMORY
MEMORY
CANCEL
CANCEL
MONO A/B
MONO A/B
fee is paid. Therefore, do not throw the supplied card
away when the 10 day listening period has expired.
• Insert the card with the side which contains the
chip pointing to the left in the ST16.
• Press DMX to select the DMX reception mode.
Favourite stations
In the FAVourite memory, you can store in sequence
your own favourite stations out of the FREE and
DMX stations. Up to 100 stations can be placed in
the FAVourite memory.
• To select stations from the favourite memory,
press first FAV.
– If no stations are stored yet in the favourite
FAV
DMX
memory bank, the display shows EMPTY and
EMPTY
returns to the last selected station.
Note: for storing stations see next page.
LEARN
The ST16 leaves the factory with all the actual Astra
radio stations pre-programmed (available stations at
the time of production). It is also possible to
program new stations easily.
Automatic search of new stations
To be able to programme new ADR stations of
TR 11186
which the reception frequency is not known to you,
the ST16 is provided with an automatic tuning
system (LEARN).
This system automatically programmes all receivable
digital radio stations of the ASTRA system in the
right categories FREE or DMX.
This procedure can take approximately 30
POL VERT
minutes. Your own favourite FAV table remains
unchanged.
The LEARN system stores the FREE stations in
STEREO
ascending order in the empty memory positions and
the DMX stations according to the transmitted DMX
number.
SWF1 BW
A repeated LEARN procedure does not clear any
station that at that moment can not be received.
However, it stores new stations if the unit receives any.
• Press the LEARN key for at least 2 seconds.
– The automatic search is started and the display
LEARN
shows LEARN >>.
– As soon as a station is found, the number of that
LEARN
station will be shortly indicated on the left of the
display.
LEARN
– The DMX LED lights up if a DMX station is found.
– After the search the set will tune to station nr. 1 in
the FREE memory bank.
• The LEARN function can be interrupted at any
moment by switching the unit off and on again.
The already existing memory of DMX and FREE
stations will then remain unchanged.
SELECTING STATIONS
Selecting stations
• Press FREE or DMX or FAV to select the FREE-to-
air, DMX or FAVourite mode. A dash on the
display will light up if DMX and/or FAV memory
banks are selected.
Calling up sequentially
• With the keys 1 2 (and STATION $ # on the
remote control) you can call up the different
STAR*SAT
stations one after the other.
Direct entry of a station number
• With the 0-9 keys on the remote control, you can
directly enter the desired number.
– For one-digit numbers, briefly press the number.
– For two-digit numbers, please keep the first num-
ber pressed until it jumps one place to the left.
Then enter the second number.
– For three-digit numbers, please keep the first num-
ber pressed until it jumps two places to the left.
Then enter the second and third number.
Selection according to programme type
• By pressing several times PTY on the ST16, you
can call up the programme types one after another.
– If you release the PTY key, the unit starts scanning
FAV
DMX
the stations to find a station broadcasting the
required programme type. As soon as such a
ROCK
station is found it is tuned to.
– If there are no stations broadcasting a given pro-
NONE
gramme type, the display briefly shows NONE.
• Press PTY again to select the next station with the
same programme type.
• For programme type selection via the remote
control, press first PTY and then the desired
programme type or use the PTY $ # keys.
The defined programme types are: CLASSIC, POP,
OLDIES, ROCK, JAZZ, COUNTRY, SPECIAL,
REGIONAL, NEWS and GENERAL.
DIRECT FREQUENCY ENTRY
Direct frequency entry
The satellite magazines inform regularly about new
stations introduced in the Astra satellites. In order
not to need to spend at least 30 minutes to add 1
or 2 new stations, a direct input mode is available.
• Press FREQUENCY on the remote control.
– The display shows the transponder frequency of
the station which is actually chosen.
MHz
• Enter the frequency from left to right with the digit
keys.
SC 666
• You can also use the STATION $ # keys to go
MHz
1 MHz up or down (fine tuning).
– After the last entry the set tunes immediately to
that frequency.
• Press FREQUENCY again.
– The display shows the actual sub-carrier
frequency.
• Enter the sub-carrier frequency with the digit keys.
• You can also use the STATION $ # keys to go
10 kHz up or down.
• Press FREQUENCY again.
– The set shows the polarisation
• Set the polarization to horizontal or vertical with
the H/V key.
• Press FREQUENCY again to confirm the setting.
– The display shows STEREO or MONO A or B and
afterwards the name of the station.
• Store the station in the memory by pressing OK.
– The station will automatically be placed in the
correct memory bank FREE or DMX.
• Storing of a frequency is not possible if the
display shows NO SIG.
Note: If you have found a DMX station in this way,
it is stored at the first free memory location.
However, if after some time the LEARN function is
performed again, this DMX station will receive the
transmitted DMX number and the memory location
number will change.
Werbung
Inhaltsverzeichnis
