Adjusting Microphone Sensitivity - Philips AVENT SCD525 Benutzerhandbuch

7.4 Lullaby function
7.4.1 Selecting a lullaby
Select 'Lullaby' with the + and - buttons.
1
Press the OK button to confirm.
2
Press the + button once or several times to
3
select one of the five lullabies from the list or
to select 'Play All'.
Press the OK button to confirm.
4
When you have selected one of the five lullabies,
it is played 5 times in a row.
When you select 'play all', all 5 lullabies are played
once.
7.4.2 Switching to another lullaby
Press the + button to choose another lullaby
1
from the list.
Press the OK button to confirm.
2
7.4.3 Pausing a lullaby
Press the OK button.
1
• The message 'Paused' appears on the
display.
Press the OK button again to resume the
2
lullaby.
If you do not continue the lullaby within 30
seconds, the lullaby function switches off
automatically. The message 'Paused' and the lullaby
symbol disappear from the display.
7.4.4 Stopping a lullaby
Press the + button to select 'Stop' from the
1
list.
Press the OK button to confirm.
2
7.5 Adjusting microphone
sensitivity
Note:
D
You can only adjust the microphone sensitivity in
the menu of the parent unit.
You can set the microphone sensitivity of the
baby unit to the desired level. You can only change
the microphone sensitivity when a connection
between the baby unit and the parent unit has
been established, i.e. when the LINK light on the
parent unit lights up green continuously.
12
Select 'Sensitivity' with the + and - buttons.
1
Press the OK button to confirm.
2
Select the desired microphone sensitivity
3
level for the baby unit with the + and -
buttons. (Fig. 31)
1 Minimum sensitivity level
2 Maximum sensitivity level
Press the OK button to confirm.
4
• The message 'Saved' appears on the display.
Note:
D
When the microphone sensitivity of the baby unit
is set to a high level, it picks up more sounds and
therefore transmits more often. As a result, the
units consume more power and the operating
time of the battery is shorter.
7.6 Sound alert on/off
Note:
D
You can only switch the sound alert on and off in
the menu of the parent unit.
This feature allows you to monitor your baby
silently. It enables you to switch off the volume on
your parent unit and still be alerted if your baby
cries.
If the sound alert is switched on, the parent unit
beeps as soon as the fourth sound level light
lights up blue while the volume is switched off. In
addition, the backlight of the parent unit display
goes on and the sound alert symbol ( q) flashes
on the display.
Select 'Alert settings' with the + and - buttons.
1
Press the OK button to confirm.
2
Select 'Sound alert' with the + and - buttons.
3
Press the OK button to confirm.
4
If the alert is off, the display shows 'On?'. Press
5
the OK button to switch on the alert. If the
alert is on, the display shows 'Off?'. Press the
OK button to switch off the alert.
• If you have set the sound alert to 'on', the
sound alert symbol ( q) appears on the
display of the parent unit.