Voltage Monitor - Asus Striker II Extreme Handbuch

Voltage Monitor

Vcore Voltage
CPU PLL Voltage CPU PLL Voltage
CPU VTT Voltage
Memory Voltage
NB Core Voltage
SB Core Voltage
DDR3 Termination Voltage
3.3V Voltage
5V Voltage
12V Voltage
F1:Help
ESC: Exit
Vcore, CPU PLL, CPU VTT, Memory, NB Core , SB Core, DDR3 Termination,
3.3V, 5V, 12V Voltage
Die integrierte Hardware-Überwachung erkennt automatisch die
Spannungsausgabe über die integrierten Spannungsregler.
Temperature Monitor
CPU Temperature
M/B Temperature
NB Temperature
SB Temperature
OPT1 Temperature
OPT2 Temperature
OPT3 Temperature
NB Overheat Protection NB Overheat Protection
SB Overheat Protection
OPT1 Cable Overheat Protection[90]
OPT2 Cable Overheat Protection[90]
OPT3 Cable Overheat Protection[90]
F1:Help
ESC: Exit
CPU, M/B, NB, SB, OPT1/2/3 Temperature
Die integrierte Hardware-Überwachung erkennt automatisch die CPU-,
Motherboard-, Northbridge, Southbridge und OPT1/2/3-Lüftertemperaturen.
Diese Elemente sind nicht vom Benutzer einstellbar.
NB Overheat Protection; SB Overheat Protection [90]
Das System schaltet sich automatisch ab, wenn die Chipsätze von
Northbridge und Southbridge überhitzt sind, um sie vor Schäden zu
schützen. Konfigurationsoptionen: [Disabled] [70] [80] [90]
4-34
Phoenix-AwardBIOS CMOS Setup Utility
Voltage Monitor
[ 1.32V]
[ 1.52V] [ 1.52V]
[ 1.20V]
[ 2.00V]
[ 1.26V]
[ 1.50V]
[ 0.99V]
[ 2.89V]
[ 4.66V]
[11.64V]
↑↓ : Select Item
→←: Select Menu
Phoenix-AwardBIOS CMOS Setup Utility
Temperature Monitor
↑↓ : Select Item
→←: Select Menu
Power
-/+: Change Value
Enter: Select SubMenu
Power
30ºC
35ºC
44ºC 44ºC
47ºC
0ºC
0ºC
0ºC
[90] [90]
[90]
-/+: Change Value
Enter: Select SubMenu
: [Disabled] [70] [80] [90]
Select Menu
Item Specific Help
Press [Enter] to set.
F5: Setup Defaults
F10: Save and Exit
Select Menu
Item Specific Help
Set NB Over-Heat
Shutdown Temperature
F5: Setup Defaults
F10: Save and Exit
Kapitel 4: BIOS-Setup