Timbertech RSSR01 Original Bedienungsanleitung Seite 57

WARNING! Never switch on the tool before the blade assembly is installed. Risk of injury!
1. Do not rinse the tool with water.
2. Store the tool in a dry place when not in use.
3. Before every use of this tool, check whether the blade assembly is in good order and
have it repaired in time if damage has been found.
4. The blade assembly should be cleaned and lubricated in time after each use. If the tool
is not used for an extended period of time, lubricate it thoroughly before storing.
Made in PRC for: JAGO AG, Ingersheimer Str. 12, 70499 Stuttgart / Germany
Tel/Fax-Nr. 0180 5 016085 (14 cent/min* from german landline, max. 42 cent/min* from mobile network (*incl. 19% VAT))
EN
1
m
AintenAnce And RepAiR
57
2