Before Use; Check The Package Contents; Disposal Of Packaging Materials; Charging The Battery - Silvercrest STBD 6 A1 Bedienungsanleitung

Before use

Check the package contents

(For illustrations see the fold-out page)
The following components are included in delivery:
▯
Bluetooth
▯ Charging cable
▯ These operating instructions
♦ Remove all parts of the device from the packaging and remove all packaging
materials.
NOTE
► Check the package for completeness and for signs of visible damage.
► If any items are missing or damaged as a result of defective packaging or
insufficient care during transportation, contact the Service hotline (see the
section Service).

Disposal of packaging materials

The packaging protects the device from damage during carriage. The packaging
materials have been selected for their environmental friendliness and ease of
disposal, and are therefore recyclable.
Returning the packaging to the material cycle conserves raw materials and reduces
the amount of waste which is generated. Dispose of packaging materials that are
no longer needed in accordance with applicable local regulations.

Charging the battery

Before using the keyboard, the integrated battery must be completely charged.
♦ Connect the USB plug of the charging cable
♦ Connect the micro USB plug of the charging cable to the charging socket
the keyboard. The charging LED
When charging is complete, the charging LED
NOTE
► The maximum charging time is approx. 3 hours.
► If the connection LED
and needs to be charged.
► If you connect the powered-on keyboard to a PC, the message "USB device
not recognised" can appear. This is not a malfunction as the keyboard is de-
signed only for the Samsung Galaxy Tab 3 and cannot be used with a PC.
│
■ 32 GB
keyboard STBD 6 A1
®
lights up orange and the battery charges.
starts flashing constantly orange, the battery is flat
to a PC or to a USB power supply.
goes out.
STBD 6 A1
on