THOMSON ROC 4505 Bedienungsanleitung Seite 9

5. If the problem persists and always with the same
key, check that the original remote control is
actually operating: is it sending IR signals? (check
batteries; is it correctly aligned in relation to the
diode on your ROC 4505?
Note 2:
• You cannot copy keys to the
, ,
SETUP MACRO FAV
• All the keys copied to a mode will be deleted if a 4
figure code is entered for this mode (and likewise for
direct entry of a code, search of a code or make).
Identifying the position of the diode
on the original remote control (keys
to copy)
If the LED of the original remote control is not
visible (for example, if hidden behind a dark plas-
tic plate), the instructions below will help you to
locate it precisely.
1. Place the front of the original remote control
(the part you point at the device to control)
around 2.5 cm from the LED of your ROC
4505 opposite
LEARN
gram at beginning of instructions).
2. Hold down the
SETUP
responding to the last selected mode remains
lit.
3. Release the
SETUP
4. Press once on a mode key (
The key goes out and then relights.
5. Press once on the
6. Hold down one of the keys on the original
remote control while moving the remote
control from left to right. As soon as the 2
remote controls are correctly aligned, the
mode key blinks rapidly.
7. To copy the key functions from your original
remote control into your ROC 4505, go to
step 5 of "To copy keys".
Note: Some original remote controls don't transmit conti-
nuous IR signals when a key is held down. If this is the
case, press several times on one of the keys while moving
the remote control from left to right.
To copy keys
1. Hold down the
SETUP
responding to the last selected mode remains
lit.
2. Release the
SETUP
3. Press once on the mode key (
...).The key goes out then relights.
4. Press the
LEARN
5. Press once on the key of your ROC 4505
to which you want to copy one of the keys of
your original remote control.
6. Hold down the key of the original remote
control you wish to copy until the mode key
goes out and then relights (2 to 3 seconds).
In case of problems, the mode key will blink
for 3 seconds but will remain in learning
mode.Try again or try another key.
7. For the other keys, repeat the procedure
from step 5 onwards.
Press the key once when all the desired
SETUP
keys have been copied.The mode key goes out.
,
LEARN BACKLIGHT
, keys.
HOME CINEMA
(see LEARNING dia-
key until the key cor-
key.
, ,
TV DVD VCR
key.
LEARN
key until the key cor-
key.
, ,
TV DVD
key once.
To delete all keys copied under a
mode
1. Hold down the
responding to the last selected mode remains
lit
2. Release the
,
3. Press once on a mode key (
The key goes out then relights.
4. Press twice on the
out then relights.
5. Press once on the
goes out.All the keys copied under this mode
are deleted.
The
The Home Cinema mode is a mode in which cer-
tain keys of the remote control are dedicated to
those devices that you select.This becomes pos-
sible after allocating a mode key (
a group of keys previously dedicated to this
mode. For example, the play keys (8) can be allo-
cated to a video cassette recorder, a DVD player,
a cassette player, hifi system, etc. It is up to you to
choose which device you will allocate to this
group of keys. You need to do the same for the
other groups of keys.
, ...).
The groups of keys are:
All the keys except the
well as the play keys (8) plus the navigation keys (5).
• the
PROG
• the
VOL
• play keys
• the navigation keys
,
EXIT OK
How to program the
key?
1. Hold down the
responding to the last selected mode remains
lit.
2. Release the
3. Press once on the
mode key goes out then relights.
4. Select the device allocated to the number
,
VCR
keys (1 to 9).
Press once on a numbered key then once on a
mode key (
TV
then relights.
5. Select the device allocated to the
(channel changes).
Press once on the
mode key (
TV
then relights.
6. Select the device allocated to the
keys.
Press once on the
on the mode key (
out then relights.
5
key until the key cor-
SETUP
key.
SETUP
,
TV DVD
. key.The key goes
LEARN
key.The mode key
SETUP
HOME CINEMA
TV
, and
PROG VOL
key
and keys (4)
.
HOME CINEMA
key until the key cor-
SETUP
key.
SETUP
HOME CINEMA
, , , ...). The key goes out
DVD VCR
key then once on a
PROG
, , , ...). The key goes out
DVD VCR
or (4) keys then once
VOL
, , , ...).The key goes
TV DVD VCR
, , ...).
VCR
key
, , ...) to
DVD
keys, as
, ,
MENU
key. The
key
PROG
and
VOL