Operation By Means Of The Optional Radio Remote Control; Working With The Internal Timer - HEYLO Base Classic Bedienungsanleitung

6.5 Operation by means of the optional radio remote control

Plug the receiver of the optional radio remote control into the 3-pole XLR socket on the back side of
the device. You can trigger the fog process by pressing the actuator button on the manual hand
transmitter. If you release the actuator button, fogging will stop.

6.6 Working with the internal timer

Times of fogging and breaks can be programmed as well as the pump value be set using the internal
timer.
In order to get to the Timer menu, press and hold the Mode button
Once the device has changed to the Timer mode, the red Timer
LED will illuminate.
If the Timer is activated, the red Timer LED will flash.
By pressing the Up/Down buttons you will set the pump value (1% - 99%).
By pressing the Mode button, you will get to where the
break time is set
Using the Up/Down buttons, you can set the desired value (P.xx).
By pressing the Mode button, you will get to where the
fogging time (F.xx)
Using the Up/Down buttons you can set the desired fogging time.
Start the time by pressing the Enter button. The timer will now run with the set values.
XLR 3-pole plug of the receiver
Actuator button of the radio transmitter
.
is set.
15
for more than 2 seconds.
EN