For unit series:
Type:
HEYLO GmbH of Im Finigen 9, D-28832 Achim, Germany, declares that, if they are fitted, maintained and used in
conformity with the operating instructions and the generally accepted engineering standards, the machines
mentioned are in keeping with the fundamental safety and health requirements of the "Machine Ordinance" as
well as with the regulations and standards mentioned hereinafter.
Applicable EC directives:
EN 600335
EN 50081-1
EN 50082-1
89/336/EWG
These products meet the requirements in conformity with the Directive on Electromagnetic
Compatibility 2004/108/EC and its modifications, the Directive 2006/95/EC and the Low-Voltage
Directive and its modifications.
The devices are type-tested in conformity with German standard DIN VDE 0700, part 1 and
part 30 EN 60335-1 and EN 60335-2-30 and bear a CE mark.
Achim, 1st December 2014
---------------------------------------------------------------------------------------------------------------------------------------
Table of contents
1. Introduction ........................................................................................................................................ 11
2. Safety guidelines ............................................................................................................................... 11
3. Initial operation .................................................................................................................................. 12
4. Fog fluids ........................................................................................................................................... 12
5. Operation ........................................................................................................................................... 12
5.1 Control panel ................................................................................................................................... 13
5.2 Switching off .................................................................................................................................... 13
6. Operating possibilities ....................................................................................................................... 13
6.1 External triggering ........................................................................................................................... 13
6.2 Operation via DMX .......................................................................................................................... 13
6.3 Stand-alone operation ..................................................................................................................... 14
6.7 Autostart .......................................................................................................................................... 16
7. Servicing, maintenance ..................................................................................................................... 16
8. Fault finding and removal .................................................................................................................. 17
9. Technical data ................................................................................................................................... 17
EC Declaration of Conformity
Fog machine
Base Classic
Safety of machines (machine ordinance)
DIN 57700 Part 245 / VDE 0700 Part 245
Electro-Mechanical Compatibility (EMC)
Electro-Magnetic Compatibility (EMC).
Electro-Mechanical Compatibility (EWG)
10
.................................................
Dr. Thomas Wittleder
- Managing Director -
EN