Herunterladen Inhalt Inhalt Diese Seite drucken

Kindermann 7447000500 Installations- Und Bedienungsanleitung Seite 31

Multiformat hdbt transceiver kaskadierbar in reihenschaltung (daisy chain)
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Key lock and energy saving function:
Reading out the fi rmware versions and updating the fi rmware:
Use the button
To display these, move the mouse pointer over the desired QuickSelect 3.0 +.
Then the fi rmware versions of the QuickSelect 3.0+ incl. the valens HDBT chip sets are displayed.
To load a newer fi rmware onto a QuickSelect 3.0+, proceed as follows:
1.
Copy the fi rmware fi le provided by Kindermann to the root directory of an USB stick
(Filename: MERGE.BIN).
2. Disconnect the QuickSelect 3.0+ to be fl ashed from the power supply and connect the USB stick to
its USB charge socket.
3. Plug the supplied or a self-made Quick-Setup jumper into the socket "HDMI1" at the rear of the
device and restore power supply.
4. During the fi rmware update process the LEDs of the signal inputs on the front light-up several times.
After they lit up 3x quickly disconnect the jumper on „HDMI1".
5. Wait until the LED activity stops. The duration of the fi rmware update is approx. 60 sec. After the
LED activity stopped press the ShowMe button on at the front. If the VGA LED lights up the Update
is done. Now unpower the unit and remove the USB-Stick.
6. Then perform a factory reset and setup of the updated device.
Note: Never disconnect the power supply during the fi rmware update
- the device may be rendered useless!
You can use the pulldown menu to either lock all external ShowMe
buttons ('All-Key') or individual ones ('VGA', 'HDMI1', 'HDMI2') for a
single user ('Selected...') or for all users ('All Unit') (moderator func-
tion). Press 'Key Lock' or 'Key Unlock' to assign the selected status.
You can use the pulldown menu to either switch all devices ('All
Units') or individual devices ('Selected Unit') to Standby mode or
Power On mode.
to read out the fi rmware statuses of the recognised QuickSelect 3.0 +.
Status in the device chain
Status of the inputs
Status of the automatic signal recognition
fi rmware statuses:
- Quickselect 3.0 +
- Valens chip set input
- Valens chip set output
31

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Quickselect 3.0+

Inhaltsverzeichnis