Herunterladen Inhalt Inhalt Diese Seite drucken

Kindermann 7447000500 Installations- Und Bedienungsanleitung Seite 27

Multiformat hdbt transceiver kaskadierbar in reihenschaltung (daisy chain)
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

6.2 Expert view
Selecting the „Expert" mode will cause the software to switch to expert view. You can individually
confi gure your Quickselect system here. This is necessary, e.g. to fi le diff erent EDIDs in the individual
transmitters, use to power control via RS232 or to confi gure the HDMI outputs.
System overview and address awarding:
Pushing this button will fi nd and recognise the QuickSelect 3.0 +
transmitters that are combined in this chain and correctly connected.
The left one of the two numbers means the internal ID (not relevant
for the user) and the second number the currently assigned address.
Auto Address awards the addresses automatically (only applies to the
devices with BCD switches set to 99).
Clicking this button corresponds to pushing the Show Me button
of the respective selected device (recognisable by the red frame).
Here, you can activate/deactivate the automatic input selection for
each device for individual selected devices or for all devices in the
chain. If this function is on, the input with the newly applied image
signal is chosen automatically. This image signal is only transmitted
when the device is active (ShowMe).
In this section, it is specifi ed which of the 4 inputs (Link In, HDMI
1, HDMI 2 or VGA) is put on the ‚HDBT-Out' for forwarding to the
following component.
The button ‚HDMI Out' determines which of these inputs is put on
the HDMI output of the selected QuickSelect 3.0 +. This way, a locally
connected preview monitor can display the video signal coming in via
the ‚Link-In' or a signal fed in locally via HDMI/VGA.
Field to display the device chain
(devices appear after
Output of the EDID information.
Device responses received via RS232.
Here, the RS232 code of the
commands sent via the GUI is listed
additionally. In addition to this,
a manual input option for RS232
control commands is present here.
Note: Before manually entering
commands, delete this fi eld;
otherwise, all displayed commands
will be sent.
).
27

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Quickselect 3.0+

Inhaltsverzeichnis