Safety Instructions - Kindermann 7447000500 Installations- Und Bedienungsanleitung

GB
Table of contents
1. Safety instructions
2. Connections front and rear
3. Scope of delivery
4. System description and functions
5. Quick system setup
5.1. Wiring devices
5.2. Manual device address awarding
5.3. Automatic device address awarding (address "99")
5.4. Reading and saving EDID information of playback devices
5.5. Chain or Ring-Setup?
6. Configuration with the graphical user interface
6.1. Basic configuration
6.2. Expert configuration
7. RS232 control
8. Operation by ShowMe button
9. Technical data
10. Available accessories
11. Application examples
11.1. Single-table solution with HDBT-wall connection panel
11.2. Two tables or flood tanks with HDBT-capable projector
11.3. Conference table with WiPG and operating options in every position

1. Safety instructions

• Please read the instructions with care and keep them
• The QuickSelect 3.0+ must only be operated with safety extra-low voltage
• The device must only be stored and used in dry environments
• Always install the device with the label up for thermal reasons
• Ensure sufficient ventilation of the devices
• Please observe the safety notes of the devices to be connected
21