EN
PROOF S4
Assembly
12
!
ATTENTION!
Perform the following steps
in the order indicated!
16
Shower control
13
15
12.
Check the position of the thermostat knob – the locking
knob should be pointing directly upwards.
13.
Insert the front plate at an angle and apply some pressure
while turning it to the left to align it horizontally.
14.
Arrest front plate by fastening the locking screw at the
lower right.
15.
Open the main water valve.
16.
The device is now ready for operation.
Perform a system test.
WimTec PROOF S4
14
16