Getting Started; When You Are Finished - Electrix RC Boost Bedienungsanleitung

GETTING STARTEd

1. Fully extend Antenna and Power on Transmitter.
2. Connect battery to Electronic Speed Control (ESC) and
power on the ESC.

WhEN yOU ARE fINIShEd

1. Power off Electronic Speed Control (ESC).
2. Power off the Transmitter and Lower Antenna.
note: To prevent damage to antenna, collapse the antenna by
pulling the lower sections in first.
3. Do a Test of Transmitter's control of vehicle with vehicle wheels
off ground.
4. Start driving slowly and if the vehicle does not go straight,
adjust steering trim dial on Transmitter.
note: Seat motor brushes by driving smoothly on a flat surface
during use of the first battery charge.
3. Disconnect Battery.
1
4. Remove Battery from vehicle.
2
boost 7
TM
EN