Creating A Playlist - Grundig RRCD 1400 Handbuch

CD/MP3 MODE
Selecting albums and tracks
(MP3/WMA only)
1
Press »STOP « to end playback.
7
2
Select the album with »
3 Start playback with
– Playback starts with the first track of the se-
lected album.
4 Select the track by pressing »
– Playback of the track starts automatically after
a short time.
Repeating functions
Repeating a track (Repeat One)
1 During playback, press »MODE« repeatedly
until » « appears in the display.
M
– The current track is repeated.
2
To quit this function, press »MODE« repeat-
edly until » « disappears from the display.
M
Repeating all the tracks on an album
(MP3/WMA only)
1 During playback, keep pressing »MODE« un til
» « appears in the display and »
M
with the album number and the track number
alternately.
– All the tracks on the current album are played
back repeatedly.
2
To quit this function, press »MODE« repeat-
edly until » « disappears from the display.
M
Repeating all tracks of a CD (Repeat
All)
1
During playback, press »MODE« repeatedly
until » « appears in the display.
ALL
M
– All the tracks on the CD are played back
repeatedly.
2 To quit this function, press »MODE« repeat-
edly until » « disappears from the display.
M
Note:
If a playlist is stored, all the tracks of the play-
7
list inserted are repeated when the Repeat
All function is selected.
22 ENGLISH
-----------------------------------------------------------------------------------------------------------------
& %
« or »
»PLAY PAUSE II«.
e
« or »
5 a s 6
« flashes
Playing back tracks in random
order
1
During playback, press »MODE« repeatedly
until »
RANDOM
«.
– Random playback starts automatically.
– All tracks on the CD are played back once
in random order.
2
To quit this function, press »MODE«.
– Display: »
«.
– The tracks are played back in the normal or-
der.

Creating a playlist

You can store and then play back up to twenty
tracks (for MP3/WMA from different albums) on
the CD in a set order. A track may be saved more
than once. Programming is only possible in stop
mode.
Selecting and storing tracks
1 Press »PROG.« to open the function.
– Display: »P01« for the first memory position
and »
PROG
2 Select the track with »
with »PROG.«.
– Display: »P02« for the second memory posi-
tion and »
3 To store more tracks, repeat step 2.
Playing back a playlist
1
Start playing the playlist with
II«.
e
– Display: »
– Playback begins with the first programmed
track.
2 Press »STOP
– Display: »
3
To play the playlist again, press
II«.
e
« appears in the display.
« disappears.
RANDOM
« flashes.
« or »
5 a s 6
« flashes.
PROG
»PLAY PAUSE
«.
PROG
« to end playback.
7
«.
PROG
»PLAY PAUSE
« and save