Unit Number Query; Change Configuration; Code Number Protection; Sub-Menu : Change Configuration - ECOLAB LMIT 08 Bedienungsanleitung

8.4.2.6 Unit number query

Fig. 8.15
8.4.3

Change configuration

8.4.3.1 Code number protection

Fig. 8.16
At first activation of the code number protection the code number can be selected between 001
and 999. (from Software Version V1.8)
Enter the code number by using "SEL".
If the code number is disabled and the arrow key ↓ is depressed, then the code number menu is
no longer displayed. The sub-menu shown is immediately displayed.

8.4.3.1.1 Sub-menu : change configuration

Fig. 8.17
417101109_LMIT08.doc
Access to the equipment configuration is authorized if the
correct code number is entered.
In order to disable the code number protection, it is also
necessary to input the correct code number.
The code number protection is not activated exworks.
- 67 - Rev. 3-01.10