Reset - Wohler CDL 210 Bedienungsanleitung

6.8

Reset

Fig. 17: Reset-mode
Fig. 18. no reset

In normal mode press and hold the SET key
for three seconds to enter P1.0 mode.

Press LOG/▲ three times to enter P4.0 mode
for reverting the meter to default status, see
Fig. 17.

Press SET to enter P4.1 mode with blinking
"No" (default), see Fig. 18, so that no reset will
be done.

To switch the status (Display "YES") press
LOG/▲ or MIN/MAX▼. When "Yes" is cho-
sen, y reset to the parameters specified above
will be done.

Then press SET to save the setting or press
ESC without saving and return to P4.0 mode.
If you choose "Yes" the meter is reset to the fol-
lowing defaults:
Parameter
P 1.1
P 1.2
P 1.3
P 2.1
P 4.1
Setup
Default
700 ppm
1000 ppm
5000 ppm
°C
No (no reset)
EN
49