Extreme Tweaker-Menü - Asus Maximus III Formula Handbuch

3.3 Extreme Tweaker-Menü
Im Extreme Tweaker-Menü können Sie die Übertaktungseinstellungen festlegen.
Beim Einstellen der Elemente im Extreme Tweaker-Menü ist Vorsicht geboten.
Falsche Werte können zu einer Systemfunktionsstörung führen.
Die Standardwerte der folgenden Elemente variieren entsprechend den auf
dem Motherboard installierten Prozessor un Speichermodulen.
Extreme Tweaker Main Advanced Power Boot Tools Exit
Configure System Frequency/Voltage
Target CPU Frequency: 2128MHZ
Target DRAM Frequency: 1066MHZ
CPU Level Up
Memory Level Up
-------------------------------------------------
Ai Overclock Tuner
CPU Ratio Setting
CPU Configuration
*Intel(R) SpeedStep(TM) Tech [Enabled]
*Intel(R) Turbo Mode Tech
QPI Frequency
DRAM Timing Control
CPU Clock Amplitude
PCU Clock Amplitude
CPU Clock Skew
v02.61 (C)Copyright 1985-2011, American Megatrends, Inc.
Rollen Sie nach unten, um die folgenden Elemente anzuzeigen:
PCU Clock Skew
******** Please key in numbers directly! ********
Current Voltage: 1.078V 1.799V 1.118V
CPU Temperature: 33˚C/91˚F
Extreme OV
Full Phase Control
Load-Line Calibration
CPU Voltage Mode
CPU Voltage
CPU PLL Voltage
IMC Voltage
Current Voltage: 1.058V
PCH Temperature: 38˚C/100˚F
PCH Voltage
Current Voltage: 1.535V
DRAM Voltage
DRAM DATA REF Voltage on CHA [Auto]
DRAM CTRL REF Voltage on CHA [Auto]
DRAM DATA REF Voltage on CHB [Auto]
DRAM CTRL REF Voltage on CHB [Auto]
Keyboard Tweakit Control
******** Spread Spectrum and Clock Skew *********
CPU Spread Spectrum
PCIE Spread Spectrum
v02.61 (C)Copyright 1985-2011, American Megatrends, Inc.
ROG Maximus III Formula
BIOS SETUP UTILITY
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Disabled]
[HW TEST]
[Auto]
[VID]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Disabled]
[Auto]
[Auto]
Tuning Mode is the
BIOS menu switch for
different purpose.
Extreme OC offers
the max tuning degree
of freedom to the
extreme.
Gaming provides the
major tuning settings
for system
performance boot.
←→ Select Screen
↑↓ Select Item
+- Change Field
F1 General Help
F10 Save and Exit
ESC Exit
←→ Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
3-9