Troubleshooting - BWT Multipur 65 M Einbau- Und Bedienungsanleitung

Troubleshooting

Fault
Water pressure
considerably in network
Flushing water outlet does not
close
Flushing water outlet leaks
If the fault cannot be rectified using these notes, please contact a specialist firm or our Customer
Service.
Cause
dropped Dirty filter element
Backwash element does not
reach the end position due to large
particles of dirt
Defective seal
Solution
Carry out backwash
Repeat backwash several
times
Pull cover plate (7 7 7 7 7 ) down and
close flushing water outlet
with safety stop valve (6 6 6 6 6 ).
Have seal replaced by
specialist firm.
EN
13