Nordcap M1 Gebrauchsanleitung Seite 8

INDEX
1. Reception
2. ID plate
3. Recommendations for Installation
3.1 General notes
3.2 Placement
3.3 Installation
3.4 Power cord replacement
4. Recommendations to the User
4.1 Starting-up
4.2 Brake working instructions (option)
4.3 Powercompact microprocessor instructions
4.4 Defrost
4.5 Cleaning
4.6 Maintenance
4.7
Prolonged Inactivity
4.8 Anomalies
Notes
First we want to thank your preference for our refrigerated equipment, which fulfils all the Directives and Standards applied and will
meet for sure, your expectations and satisfy your needs.
Our thanks
1 - Reception
Upon receiving the equipment, please verify carefully if the package is intact and was not subject to any damage during
transportation.
After it has been unpacked please confirm that there is no component missing and if the characteristics and the
condition correspond to the specifications in the purchase order.
This equipment has been created to work at a 5 climatic class (40ºC room temperature, 40% Hr).
The installation, maintenance and any other interventions, should be carried out by specialised and authorised technicians. The
manufacturer declines any responsibility and is not obliged to cover the guarantee, should these conditions not be respected.
It should be remembered that our continuing research in technological improvements, could mean that alterations have been
made in the characteristics as indicated without prior warning.
2 - Identification Plate
Our models contain, on the top of the panel control, a plate showing the data considered to be of most importance. This refers to
the name of the MODEL, the SERIAL NUMBER and YEAR, which is fundamental information in any consultation with the
manufacturer.
TMPF55A.TMP
TEC
INSTRUCTIONS MANUAL
Legend
a) Voltage (V)
c) Current (A)
e) Refrigeration gas
(ASHRAE)
N.º
TMPF55A.TMP
Page
8
8
9
9
9
9
9
9
10
10
10
11
12
12
12
12
b) Frequency (Hz)
d) Power (W)
f) Gas capacity (g)
8/40