General Safety Rules - Bosch GTS 10 PROFESSIONAL Bedienungsanleitung

Read all instructions.
Save these instructions.
1) Work area
Keep work area clean and well lit.
Do not operate power tools in explosive at
mospheres, such as in the presence of
flammable liquids, gases or dust.
Keep children and bystanders away while
operating a power tool.
2) Electrical safety
Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter
(grounded) power tools.
Avoid body contact with earthed or ground
ed surfaces such as pipes, radiators, rang
es and refrigerators.
Do not expose power tools to rain or wet
conditions.
Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the pow
er tool. Keep cord away from heat, oil,
sharp edges or moving parts.
When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
3) Personal safety
Stay alert, watch what you are doing and
use common sense when operating a pow
er tool. Do not use a power tool while you
are tired or under the influence of drugs, al
cohol or medication.

1 GENERAL SAFETY RULES

FOR ELECTRIC TOOLS
plugs with earthed
English–1
Use safety equipment. Always wear eye
protection.
Avoid accidental starting.
switch is in the off position before plugging
in.
Remove any adjusting key or wrench be
fore turning the power tool on.
Do not overreach. Keep proper footing and
balance at all times.
Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts.
If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used.
4) Power tool use and care
Do not force the power tool. Use the cor
rect power tool for your application.
Do not use the power tool if the switch does
not turn it on and off.
Disconnect the plug from the power source
before making any adjustments, changing
accessories, or storing power tools.
Store idle power tools out of the reach of
children and do not allow persons unfamil
iar with the power tool or these instructions
to operate the power tool.
Maintain power tools. Check for misalign
ment or binding of moving parts, breakage
of parts and any other condition that may
affect the power tools operation. If dam
aged, have the power tool repaired before
use.
Ensure the