Herunterladen Inhalt Inhalt Diese Seite drucken

Program Playback - auna 10027077 Anleitung

7” touchscreen / bt / dvd / usb / sd / ukw
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

PROGRAM PLAYBACK

It allows you to enter the order in which you want some chapters/tracks in DVD/VCD/MP3/WMA/CD
to play.
1
During playback, press the PROG button to enter a program interface as follows:
2
Use the direction buttons to move cursor onto the desired place for inputting the sequence number.
3
Use the number button to input desired sequence number of title/chapter/track with desired sequence.
4
Use the direction button to move cursor onto Play item, then press the OK button to play the pro-
grammed titles/chapters/tracks in programmed order; only pressing the PLAY button also can play
the programmed titles/chapters/ tracks in programmed order.
• To exit program playback, firstly press the STOP button, then press the PLAY button to enter se-
quence playback; or press the PROG button twice again.
• To remove the all programmed sequence numbers, move the cursor onto Clear item, then press the OK button.
• To change the programmed sequence, move the cursor onto the item you want to change, input the
desired sequence number.
• During VCD playback, if it is in PBC ON mode, at the same time of entering the state of program
playback, it turns off PBC mode.
PLAYBACK IMAGE FILES
1
The root menu is displayed on the monitor when beginning to switch on IMAGE mode.
2
Tap the icon
to turn to FOLDER interface, then tap the file name to open the file, finally tap the
file you desired to playback.
Note: After open the FOLDER, you can also use the direction button < or > on the remote control
to turn to next or previous page, then use the button UP or DOWN to select the file. Finally press
OK button to playback.
3
During IMAGE playback, press the direction button [<], [>], [UP], [DOWN] on the remote control to
change the angle of viewing picture that is displaying as follows: [>] 90 deg cw; [<] 90deg ccw;
[UP]: UP <-->DOWN; [DOWN]: LEFT<-->RIGHT. During IMAGE playback, press the PROG button to
change the mode of refresh picture. During IMAGE playback, press the STOP button to stop playing
and return to the root menu.
• During IMAGE playback, the following buttons are not available: SLOW-FWD, SUBTITLE, TITLE, ANG-
LE, AUDIO, RDM, INT and A-B.
• In IMAGE mode, the other operations are same as ones in MP3/WMA mode.
53
www.auna.de

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis