Playback With Slow Speed - auna 10027077 Anleitung

PLAYBACK WITH SPEED
During normal playback, press and hold the >>|/|<< button on the remote control continuously to fast
forwards or backwards at the following speeds: x2, x4, x8, x16, x20, normal. During speed playback,
press the PLAY button to resume normal playback.

PLAYBACK WITH SLOW SPEED

During VIDEO playback , press the SLOW_FWD button to execute the Slow Forward function. With
each consecutive pressing of the SLOW_FWD button, the playback speed decreases. The speed levels
in Slow Forward as follows: x1/2,x1/3,x1/4,x1/5,x1/6,x1/7,normal. During slow forward, press the PLAY
button to resume normal playback. The function is only for video.
DISPLAY STILL FRAME STEP BY STEP
If the unit is currently playing video, press the STEP button consecutively to display still frame step by
step. Press the PLAY button to resume normal playback.
ONE/ALL Repeat
1. In the mode of DVD playback: Press the RPT button on the remote control to select REP CHAPTER,
REP TITLE, REP ALL or OFF.
2. In the mode of VCD (PBC OFF)/CD playback: press the RPT button to select REP 1, REP ALL or OFF.
When it is in the state of PBC ON, during VCD disc playing, the RPT button is not available.
3. In the mode of MP3/WMA playback: Press the RPT button to select REP 1, REP DIR, REP ALL or OFF.
A-B Repeat
Press the A-B button if you want to repeat a specific segment on a disc that you define:
1 Press the A-B button at a point (A) where you want it to be the start point of the repeat segment.
Press the A-B button again at a point (B) where you want it to be the terminal point of the repeat
segment. Then it will play the segment repeatedly.
2 To cancel the A-B repeat mode and resume normal playback, press the A-B button for the third
time.
Note: During DVD/VCD/MP3/WMA/CD playback, points A and B must be within the same track.
50
www.auna.de