Herunterladen Inhalt Inhalt Diese Seite drucken

Band Button - auna 10027077 Anleitung

7” touchscreen / bt / dvd / usb / sd / ukw
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

BAND BUTTON

In RADIO mode, press the BAND button on the remote control to select your desired radio band of FM1,
FM2, Fm3,AM1 and AM2.
TUNE/SEEK UP/DOWN BUTTONS
In RADIO mode:
1
Press and hold the >>|/|<< button on the remote control or the icons >>/<< in the radio interface to
automatically search up/down for an available station from current frequency.
2
Briefly press the >>| / |<< button on the remote >>/<< control or tap the icons in the radio interface
to manually search up or down with step by step for your desired station from the current frequency.
APS BUTTON
In RADIO mode:
1
When pressing and holding the APS button on the remote control, the radio searches from the
lowest frequency and checks the signal strength level until 1 cycle search is stations are preset to
the corresponding preset number memory bank. The APS operation is finished. And then the 6
strongest implemented in the each bank of the selected band. When the AS operation is finished, it
will scan each preset station for 5 in FM or AM band from M1 as briefly pressing APS button. After
finishing a of scanning, it will resume broadcasting on the M1. (It can store 3x6 stations for FM and
2x6 stations for AM in all)
2
When briefly pressing the APS button, the radio will scan each preset station for 5 seconds in FM or
AM band from M1. After finishing a circle of scanning, it will resume broadcasting on the M1.
NOTE: In FM band, FM1, FM2, FM3 is checked one at a time; In AM band, AM1, AM2 is checked one at a time.
PRESET STATION [1-6 ] BUTTONS
In RADIO mode:
1
To memorize the current frequency on the current band, press and hold any one of the six preset
buttons (1-6) on the remote control or one of the six icons (P1-P6) in the radio interface.
2
To recall the preset memory on the current band, press one of the preset buttons [1-6] on remote
control r one of the six icons (P1-P6) in the radio interface.
STEREO/MONO BUTTON
Press the ST button on the remote control to select the STEREO or MONO sound mode for FM band.
44
www.auna.de

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis