Troubleshooting - auna 10027077 Anleitung

TRANSFER THE AUDIO OF A FILE PLAYED BY MOBILE PHONE TO THE CAR AUDIO PLAYER
In the connection status between the BT devices of the
Car Audio Player and a Mobile Phone, if the mobile phone
can play audio or video files and support A2DP, when the
Mobile Phone plays an audio or video file(For some Mobile
Phones, you must select Play by BT firstly), the audio of the
playing file will be transferred to the Car Audio Player.
In A2DP mode, if the BT device of the Mobile Phone support
AVRCP, the functions of the >>|, |<<, PLAY/PAUSE , EJECT,
MUTE, EQ, LOUD, + , - buttons are the same as one in media
mode(no fast forward/backward functions for the >>|/|<<
buttons). The other buttons available in media mode are
not available.
Note: During playback of BT connection you can use the Mode menu enter the STREAMING mode inter-
face as right. You can control the playback status by tapping the icons in the interface.

Troubleshooting

Please read the user's manual carefully before using the DVD player. If you have any troubles in using this
player, try to solve the problems by the suggestions mentioned below. If you can not remove the trouble after
using all the suggestions, please contact the company or the technical service center authorized by us. For the
sake of your safety, please do not open the cover and repair the player yourself, as it may cause electric shock.
NO PICTURE, SOUND AND INDICATION
• Ensure that the power switch is on.
• Ensure that the wall inlet is ok.
• Ensure that the power cord is not damaged or the fuse is not blown.
• Ensure that the power plug is connected to the inlet tightly.
NO SOUND BUT PICTURE OK
• Ensure that the player's audio output has a good connection with monitor's audio input.
• Check whether the audio connector is damaged.
• Check whether you have turned down the volume.
• Ensure that you have set the right AUDIO setup of the player.
• Ensure that the audio is not muted.
NO PICTURE BUT SOUND OK
• Ensure that the player's video output has a good connection with monitor's video input.
• Ensure that you have turned your monitor to the AV input channel connecting to your player.
• Check whether the video connector is damaged.
• Ensure that you have set the right VIDEO settings of the player.
61
www.auna.de