Power On/Off; Band Selector - auna 10006483 Bedienungsanleitung

NOTE:
If the wire has been disconnected, you must press the RESET button again before operate the
unit. Otherwise, the unit may not work properly.
1.

POWER ON/OFF

Press this button to turn on the unit. To turn off, press this button more than 1 second.

2. BAND SELECTOR

On radio mode, each time this button is pressed, the radio band is changed. The indication "F1",
"F2", "F3" will appear on the display according to your selection.
3. AUTO-STORE BUTTON
Press this button shortly, it searches all station frequencies upward and memorize automatically to
the 6 preset stations by catching the frequency.
4. LCD DIGITAL DISPLAY
5. DISPLAY BUTTON
This button serves to show available information.
SETING CLOCK TIME MANUALLY
a) Press this button and hold it until the display flash.
b) Rotate the volume button to set HOUR and press it again to confirm.
c) Rotate the volume button to set MINUTE and press it again to confirm.
6. MUTE
Press this button to mute volume and "MUT" will show on the display.
7. PANEL RELEASE
This button is used to release the panel from the unit.
Operating Instructions