Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENG
FIG. 2
Tent or awning
Tube/beam
Universal
bracket
Min. 10 cm.
NOTE! The minimum distance between
the infrared heater and the surrounding
walls/objects is 10 cm.
7. Connect the power cable to an grounded 230 V power socket.
We recommend using a ground fault circuit interrupter.
8. Pull the cord to switch the infrared heater on and off. See figure 4.
USE
This infrared heater is intended for outdoor use.
The universal bracket enables you to put the infrared
heater in, for example, a pavilion, awning or party tent.
You can attach the infrared heater to tubes or beams
up to a maximum of 4 cm. Choose the universal bracket
depending on where you want to put the heater. You
need to put the infrared heater at least 10 cm away from
other objects. Note that the back and top of the infrared
heater will also get hot.
Warning! When deciding where to put your infrared heater, make sure there is plenty
of space for the thermal radiation area – see figure 5.
6
Infrared heater
FIG. 3
FIG. 4
On/Off
Werbung
Inhaltsverzeichnis
