Troubleshooting; Hints On Disposal - Klarstein 10026951 Handbuch

EN
14

TROUBLESHOOTING

Fault Cause
Light on, The leaf blocked.
but motor
The capacitor damaged.
does not
work.
The motor us damaged.
The internal with of motor off or a
bad smell from the motor
Light does Beside the above mentioned, check the following:
not work,
Light damaged
motor does
not work.
Power cord looses
Oil Valve and the air ventilation
leakage. entrance are not tightly sealed
Leakage from the connection of
U-shaped section and cover
Shake of The leaf is damaged
the body.
The motor is not tightly hanged
Insufficient The distance between the body
suction. and the gas top too long
Too much ventilation from open
doors or windows

HINTS ON DISPOSAL

According to the European waste regulation 2012/19/EU this
symbol on the product or on its packaging indicates that this
product may not be treated as household waste. Instead it should
be taken to the appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of
this product. For more detailled information about recycling of
this product, please contact your local council or your household
waste disposal service.
Solution
Get rid of the blocking.
Replace capacitor.
Replace motor.
Replace motor.
Replace lights.
Connect the wires as per the
electric diagram.
Take down the one way valve and
seal with glue
Take U-shaped section down and
seal with soap or paint.
Replace the leaf
Lock the motor tightly.
Readjust the distance.
Choose a new place and
resemble the machine.