Cleaning The Original Scanning Area Of The Feeder; Cleaning The Feeder's Rollers - Canon imageRUNNER ADVANCE 6265i Anwenderhandbuch

■ Cleaning the Original Scanning Area
of the Feeder
1
Clean the original scanning area (thin glass
strip).
1. Open the feeder.
2. Clean the original scanning area (thin glass strip) with a
cloth dampened in water, and then wipe the area with
a soft dry cloth.
2
Open the covers.
1. Pull the lever above the feeder, and open the document
scan cover.
2. Hold the blue tab above the inside cover, and open the
inside cover in the direction of the arrow.
IMPORTANT
Open the document scan cover carefully, as not to scratch
the platen glass.
3
Clean the feed scanning area with a cloth
dampened in water or a mild detergent, and
then wipe the area with a soft dry cloth.
3
4
Close the covers and the feeder.
1. Close the inside cover.
2. Close the document scan cover.
3. Close the feeder.
•
When closing the covers and the feeder, be careful
not to get your fi ngers caught, as this may result in
personal injury.
•
Be aware that the light emitted from the platen
glass may be very bright when closing the feeder.
■

Cleaning the Feeder's Rollers

IMPORTANT
Spin the rollers while cleaning them.
1
Pull the lever, and open the feeder cover.
2
Clean the rollers (a total of fi ve places) inside
the feeder cover with a cloth dampened
with water. Then, wipe the area with a soft,
dry cloth.
Routine Maintenance 57