Siemens TK 68 E 570 Gebrauchsanleitung Seite 30

UNIT IS
HEATING
UNIT IS
RINSING
30
Display 4
Display 4 indicates the settings, the processes which are
running and any messages issued by the appliance.
The appliance has been programmed at the factory with
standard settings for optimum operation. These settings
can be changed see Setting/Programming" chapter.
d
Button 1
d
Button 1 switches on the appliance or switches it to
stand by" mode.
d
When button 1 is pressed, the appliance heats up and
is then rinsed. The illuminated ring on button
during this process.
The appliance is not rinsed if:
- the appliance was still warm when switched on or
- coffee was not discharged before the appliance was
switched to stand by" mode.
Heating and rinsing processes are displayed.
While coffee is being brewed, button
a Stop function. If button
is terminated.
i
4 hours after the last coffee was brewed, a rinsing
process is automatically actuated and the appliance
switches to standby mode. These settings can
be changed see Setting/Programming" chapter.
2on" button 2
Espresso or coffee can be brewed by pressing the
2 on" button 2. The green illuminated ring flashes
while espresso or coffee is being brewed.
If the 2on" button 2 is pressed again, the coffee brewing
process is terminated.
d
d
1 is assigned
d
1 is pressed, the process
1 flashes