Cleaning The Milk Frother - Siemens TE501 Serie Gebrauchsanleitung

en
Important: The drip tray (8c) and coffee
grounds container (8b) should be emp­
tied and cleaned daily to prevent mould
developing.
Note: If the appliance is cold when switched
on with the power on/off switch O / I (9) or if
it switches off automatically after coffee has
been dispensed, the appliance performs an
automatic rinse.
Important: If the appliance is not used for
a prolonged period (for example, when you
are on vacation), clean the entire appliance
thoroughly, including the milk system and
brewing unit.
Cleaning the milk frother
The milk frother (6) must be cleaned after
each use in order to remove residues.
Important: Let the milk frother cool down
before you remove it.
Dismantle the milk frother for cleaning:
1. To remove, take hold of the metal sleeve
and pull it downwards and off.
32
2. Twist the steam nozzle (6d) anticlock­
wise and remove it.
3. Remove the frothing tube (6c).
6c
4. Clean the individual parts with a deter­
gent solution and a soft brush. If neces­
sary, soak in a warm detergent solution.
Clean the air hole (6e) thoroughly.
5. Rinse all parts with clean water and dry.
6. Fit the steam nozzle (6d) and frothing
tube (6c) back into the metal sleeve.
6c
1
7. Twist the steam nozzle clockwise until
the marks are aligned.
1 6d
2
6e
6d
2