Siemens TE502...DE Gebrauchsanleitung Seite 33

Dismantling the milk system for cleaning:
1. To remove, take hold of the metal sleeve
and pull it downwards and off.
2. Twist the steam nozzle (6d) anticlock­
wise and remove it.
3. Remove the frothing tube (6c).
6c
4. Clean the individual parts with a
detergent solution and a soft brush. If
necessary, soak in a warm detergent
solution. Clean the air hole (6e)
thoroughly.
5. Rinse all parts with clean water and dry.
TE502_1DE.indb 29
1
6d
2
6e
6. Fit the steam nozzle (6d) and frothing
tube (6c) back into the metal sleeve.
6c
1
7. Twist the steam nozzle clockwise until
the marks are aligned.
8. Attach the milk frother to the steam
valve. Check that the red mark on the
steam valve is covered.
Risk of scalding
¡
Only use the appliance when the milk
frother (6) is completely assembled and
i tted.
en de
6d
2
29
29.08.2011 12:11:33