Wall-Mount Adjustment
Once the auto wall mount is installed, your tV's position can be easily adjusted.
Entering the menu
1. Press the ▲, ▼, ◄ or ► button on your remote control.
➣
The Wall Mount Adjustment screen is displayed.
➣
If the Wall Mount Adjustment screen is not displayed when
clicking on a direction button while watching your TV, use
the menu to display that screen.
• Press the MENU butt on to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENtER
button.
• Press the ▲ or ▼ button to select "Wall-Mount Adjustment",
then press the ENtER
Remembering the Position
. Adjust to the desired position using the ▲,▼,◄,► buttons.
➣
If you press an arrow button when no OSD is displayed on
the TV screen, the Adjustment screen appears.
➣
Press the INFO button to reset. Press the ◄ or ► button to
select "Yes", then press the ENtER
The position is initialized to the default setting.
. Press the blue button.
Press the ▲ and ▼ buttons to select a save mode from either
Position 1, Position 2 or Position 3 in order to save the current
position.
➣
To not save the current position, press the REtURN button.
➣
When selecting a save mode, you cannot use the Colour
buttons.
. Press the ENtER
➣
When Position1 is selected, the message "Current position
saved as Position1" is displayed.
. Press the ENtER
➣
The saved Position appears on the left side of the OSD.
(Sold separately) (depending on the model)
tV Rear Panel
button.
button to save.
button.
SERVICE Cable (Not supplied)
button.
English -
Auto Wall-Mount
tV
Plug & Play
Language
time
Wall-Mount Adjustment
Melody
Entertainment
Energy Saving
Move
Wall-Mount Adjustment
Position
1
Adjust
Save
Save
Select a mode to Save.
Position1
Position
Position
Move
Enter
Setup
: English
: Off
: Off
: Off
Enter
Return
Center
INFO
Return