Basic Setting - AXENT .ELI Bedienungsanleitung

INITIAL START UP
PLASTIC CAP
The plastic cap included in the delivery is used for the functional test and
the demonstration of the device, without having to sit on it. To test it, open
the lid and place the plastic cap on top.
Put your hand on the user identification sticker.
Should the sticker have been removed after installation, place your hand
on the lid as shown below. As soon as the activated carbon filter turns on
the device has identified you.
All the functions can now be tested with the remote control.
Instead of your hand, for user identification, a wet cloth can be placed on
the toilet seat.
8

BASIC SETTING

ENERGY SAVING
The shower toilet seat heating has been constructed to keep the energy
consumption as low as possible. The 5 step regulation for the energy consumption
is indicated with the LED`s.
Choose the desired energy saving by pressing « S hift » and « E co »
Front Rear Shift to switch from step to step.
button.
Stop
Eco
Dry Massage
Flow Temp Position
2
Following steps are selectable:
User1 Eco User2
Shift
Step 1
Step 2
Step 3
Step 4
Step 5
Finish the setting by releasing the « S hift »
Energy saving modus is disabled. The seat heating is permanently
activated. The temperature corresponds with the last utilisation or the
chosen user profile.
The seat heating is instantly disabled for the next 3 hours. The shower toilet
recognizes time and turns the seat heating off, every day at the same time.
Should the shower toilet be used within these 3 hours the seat heating will
be automatically activated.
The seat heating is instantly disabled for the next 6 hours. The shower toilet
recognizes time and turns the seat heating off, every day at the same time.
Should the shower toilet be used within these 6 hours the seat heating will
be automatically activated.
The seat heating is instantly disabled for the next 9 hours. The shower toilet
recognizes time and turns the seat heating off, every day at the same time.
Should the shower toilet be used within these 9 hours the seat heating will
be automatically activated.
The lowest temperture has been activated permanently. During use of the
shower toilet, the temperatur can not be changed.
9