AXENT .ELI Bedienungsanleitung Seite 13

MAINTENANCE AND CLEANING
CLEANING CERAMIC APPLIANCES
For ideal cleaning, the toilet seat can be removed.
First pull the main plug, then push the release button (mounting panel)
and then pull the toilet seat forward. Place it horizontally on the floor or a
platform without tilting it.
The water outlet does not need to be disconnected.
THE TOILET SEAT IS NOT ALLOWED TO BE TILTED. IT MUST
ALWAYS BE PLACED HORIZONTALLY.
CLEANING/CHANGE NOZZLE
The nozzle can be extended for cleaning.
CLEANING
During this procedure do not be seated on the unit.
Press « R eat Wash » on the control panel to extend the nozzle.
The nozzle gets rinsed automatically. Then pull the nozzle of
Rear Wash
the spray arm while holding it.
Clean the nozzle and spray arm with standard descaling agent, if necessary
you can obtain a new nozzle for replacement at your specialty retailer.
Place the cleaned or new nozzle carefully on the spray arm, while holding
it.
Press « S top » on the control panel to retract the spray arm. The
nozzles will get rinsed again.
Stop
22
CLEANING NOZZLE / SPRAY ARM
RINSING OF THE NOZZLE
Press and hold « S hift » on your remote control,
at the same time press « Flow ».
Flow
The nozzle will now be rinsed for 90 seconds with fresh water.
Shift
Front Rear
Press « S top » to stop the rinsing early.
Stop
Dry Massage
Stop
SUITABLE CLEANING DETERGENTS
Flow Temp Position
– mild bathroom or all-purpose cleaner
2
– dilute detergents with water
User1 Eco User2
– use exclusively liquid detergents
Shift
– skin friendly detergents
– normal toilet brushes
– soft sponges
– microfiber cloth
NOT SUITABLE DETERGENTS
– scouring detergents as sand or abrasive cleaning powder
– aggressive cleaning agents containing chlorine, bleach, solvents or acid.
– eye- and skin-irritating detergents
– sponge scorers
23