INTEGRA Biosciences VacuSafe Bedienungsanleitung Seite 28

10.1 Trouble-shooting (Continuation)
Problem
Insufficient aspiration power.
VacuSafe doesn't function.
Level monitor doesn't function.
Pump doesn't start. No vacuum.
Display runs normal.
28
Cause
The filter is clogged.
●
Blown fuse or wrong voltage set.
●
Level monitor is deactivated.
●
Pump motor overheated because
●
of continuous running and high
ambient temperature.
Remedy
Replace the filter.
●
Change the fuse, check the voltage
●
selection switch.
Activate level monitor.
●
Avoid unnecessary loss of vacuum
●
and continuous running of the
pump by using the hand operator
VACUBOY or use a tube clamp.