NB: Always keep the lid tight – otherwise a
pressure cannot be generated in the bottle!
Connect lid (2) and pump (PRESSURE
●
connection) with tube (4) on the pump side (blue,
with filter)
Ensure that:
●
- The blue tube connector is fitted to the blue
socket
- The rapid-action connector is properly fitted
(it must click).
NB: Always use the integrated sterile filter on the
pump side (blue). This prevents medium from enter-
ing the pump and causing damage.
Connect the VACUBOY hand operator tube or
●
other tube (3) to the tube connector on the red
rapid-action connector.
3. Dispensing
Check that the venting screw is closed.
●
Switch on the pump with the power switch
●
Set values for pressure and hysteresis if necessary
●
The pump will begin to function.
●
17